| Standards: | IEC61032 Figure 4 | Warranty: | 12 Months |
|---|---|---|---|
| Test Probe Diameter: | Ф1+0.050 Mm | Dam-sphere Diameter: | SФ35±0.2 Mm |
| Handle Diameter: | Ф10 Mm | Test Probe Length: | 100±0.2 Mm |
| Handle Length: | 100 Mm | Force: | 3N |
| High Light: | IP4X Test Probe D , 3N Test Probe D , IEC61032 finger probe test |
Test Probe D Figure 4 IP4X To Verify Protection Against Access
Specification and technical parameters:
| Parameters /Model | SC-F4D | SC-F4D-F |
| Name | Test rod probe D | Test rod probe D with force |
| Test probe diameter | Ф1+0.050 mm | Ф1+0.050 mm |
| Dam-sphere diameter | SФ35±0.2 mm | SФ35±0.2 mm |
| Handle Diameter | Ф10 mm | Ф10 mm |
| Test probe length | 100±0.2 mm | 100±0.2 mm |
| Handle Length | 100 mm | —- |
| Force | —- | 3N force |
| Standard | IEC61032.1 | IEC60529 |
Product information:
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D and IEC60529 for IP4X and IEC60065.
This wire is intended to verify the protection of persons against access to hazardous parts.
It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with “F” is with force.
