7006-107-2 Mold Steel IEC60061 Go And Not Go Gauge

Standards:IEC60061-3Warranty:12 Months
Material:Mold Steel7006-107-2:Go And Not Go Gauge A For Caps PG13&PGJ13
7006-107B-1:Go Gauge B For Caps PG13 PGJ137006-107C-1:Go And Not Go Gauge For Caps PG13 And PGJ13
Gauge Type:Lamp Cap GaugePurpose:To Check Caps PG13 And PGJ13
High Light:7006-107-2 go and not go gauge ,  IEC60061 Go And Not Go Gauge ,  IEC60061-3 go no go pin gauge

Go And Not Go Gauge For Caps PG13 PGJ13 Lamp Cap Gauges IEC60061

Name:

7006-107-2Go and not go gauge A for caps PG13&PGJ13
7006-107B-1Go gauge B for caps PG13 PGJ13
7006-107C-1Go and not go gauge for caps PG13 and PGJ13

Application:

Guangzhou Shice Equipment offers a wide range of gauge to meet the most common standards including those from

IEC, EN, UL, GB,DIN,VDE and others.

Such standards require the checking of size & definition etc.

These gauges are constructed from senior stainless steel and appropriate steel with a hardness of at least 60 HRC and a roughness

according to standard require.

Each gauge is supplied with a certificate of calibration.

Conforms To:

IEC60968-1, IEC60061-3

Specification:

IEC60061-3 PG13

7006-107-2
Go and not go gauge A for caps PG13&PGJ13

Purpose: To check the contact section of caps PG13, PGJ13 and PGJ19
Testing: It shall be possible, without using undue force, to insert the gauge into the contact section of
a PG13, PGJ13, PGJ19-1, PGJ19-2 or PGJ19-3 cap until surface Y of the gauge is seated on the rim of the
lamp cap.
It shall not be possible to insert the gauge into the contact section of a PGJ19-4 or PGJ19-5 cap.

7006-107B-1
Go gauge B for caps PG13 PGJ13
Purpose:

To check caps PG13 and PGJ13 for fit into mounting hole.

Testing:

It shall be possible, without using undue force, to insert the cap into the gauge until surface X
of the cap is seated on the surface of the gauge.

Note-All lead-in corners shall be rounded off or slightly chamfered.


7006-107C-1

Go and not go gauge for caps PG13 and PGJ13.
Purpose:

To check the barrel length of caps PG13 and PGJ13.
Testing:

It shall be possible, without using undue force, to insert the Go end of the
gauge between the reference plane and surface X of the cap, except at stop.
It shall not be possible to insert the NOT GO end of the gauge between the reference plane and surface X of the cap.

Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory testing equipment. We are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Guangzhou Shice are designed and manufactured as per the requirements of IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: waterproof and dustproof (IP) environmental test equipment; switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; household appliances safety test equipment; wire and cable test equipment; luminaires test equipment; electric tools test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

Scroll to Top