| Material: | Stainless Steel And Brass | IP Code: | IPX1, IPX2 |
|---|---|---|---|
| Temperature: | Room Temperature | Warranty: | 12 Months |
| Standard: | IEC60529 | Inner Box Size (mm): | 800×800×800(L×W×H)(can Be Customized ) |
| Dripping Rate (Water Flow): | 1+0.05 0mm/min Or 3+0.05 0mm/min Switchable | Rotating Speed(rpm): | 1 ~10 Adjustable(IP 1.2 Standard. Turntable Can Be Tilted 15°). |
| Drip Box(mm): | 600X600MM | Needle Hole(mm): | φ0 .4 |
| High Light: |
IPX2 Ingress Protection Test Equipment,TUV Ingress Protection Test Equipment,IPX1 ip testing equipment |
||
Figure3 Test device to verify protection against vertically falling water drops(drip box)
IPX1 IPX2 IEC60529 Figure 3 Falling Water Drops Test Chamber
Product information:
This equipment is suitable for the test of electrical products which are enclosure and sealed in the rain environment whether can ensure the good performance of equipment and components. The scientific design of this equipment, so that the equipment can be realistically simulated dripping water, water spraying, splashing water etc. The application of the comprehensive control system and the frequency conversion technology makes the rotation angle of the test sample rack. The swing frequency of the spray water can be adjusted automatically.
Application:
It is used for the testing of IPX1 and IPX2.
Technical parameters:
| Inner box size (mm) | 800×800×800(L×W×H)(can be customized ) |
| Dripping rate (Water flow) | 1+0.05 0mm/min or 3+0.05 0mm/min switchable |
| Rotating speed(rpm) | 1 ~10 adjustable(IP 1.2 standard. Turntable can be tilted 15°). |
| Drip box(mm) | 600X600MM |
| The distance between the drip box and the test sample | 200MM |
| Needle hole(mm) | φ0 .4 |
| Distance between holes(mm) | 20mmx20mm |
| Dripping rate (Water flow) | 1MM or 3MM per minute, adjustable. |
| Testing time | 1-999,999min(can be set) |
| Power Supply | 220V 50Hz(can be customized ) |
Conform to:
IEC60529
IEC60598-1
IEC 60335-1
IEC60745-1
VDE0630
VDE0632
IEC60034
DIN40050
ISO20653
IP Code of the IPX1 and IPX2
Test sample:
The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components,car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.).
After the test, the function test can be proceeded after normal temperature recovery of 24 H.
All stainless steel or powder coating, visible toughened glass window.
Equipped with a modest turntable (used to place the sample) with adjustable speed.
Control system: Independent research and development.
Features:
1. High- quality acid -proof stainless steel 304 inner liner.
2. Big observation window.
3. Sample electrifying test.
Safety protection device:
- Power overload and short circuit protection
- Ground protection
- Water shortage protection
- Alarm ring prompt
SC-IPX waterproof test machine is according to IEC60529:1989 +A1:1999+A2:2013 (Degrees of protection provided by enclosures (IP
Code)>,IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1.The SC-IPX includes the following test grades: IPX1, IPX2,IPX3,IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the
products such as electrical and electronic products, LED luminaires as well as in the relevant quality control department for the
waterproof detection of the enclosures protection grades.
The whole SC-IPX waterproof test system includes:
Drip Box(SC-IPX12): The drip box is for IPX1 and IPX2 drip test. The drip box size is 800x800x75mm(LXWXH). The diameter of drip hole
is 0.4mm. The distance between drip holes is 20mm. The sample can be over 150kg.
Swing Pipe Water Spray Test Equipment (SC-IPX34): It is for IPX3 and IPX4 test. The semi-diameter of swing pipe is 1meter(Any
other size is also available). The inside diameter of the swing pipe is 15mm. The sample rotating table diameter is 1000mm (Or other
size according to the diameter of the swing pipe, and the height is adjustable. The rotation speed is 1-5rpm which controlled by PLC
panel.
Waterproof Jet Test Device (SC-IPX56): With water supply device size is 1000x1000x600m, the nozzle diameter is 6.3mm (IPX5)
and 12.5mm(IPX6). The water speed is 12.5±0.626L/min for IPX5 and 100±5L/min for IPX6.
Immersion tank Waterproof test Device (SC-IPX7): It Is for IPX7 test. The water tank size is 1000x1000x1200mm (Other size can be
designed according to your request). It can test samples up to 120kg
Immersion tank Waterproof test Device(SC-IPX8): It is for IPX8 test. It can simulate a water depth of 0-50m. The water immersion
tank diameter is 600mm and the height is 1200mm. The compressive stress is 10 atmospheres or design according to customer’s
request.
We are professional IP waterproof Testing Equipment manufacturer.
