| Standards: | IEC 62368 Figure V. 1 V.2 V.3 V.4 V.5 | Material: | Stainless Steel And Nylon |
|---|---|---|---|
| IEC 62368 Figure V.1: | Jointed Test Probe For Equipment Likely To Be Accessible To Children | IEC62368 Figure V.2: | Jointed Test Probe For Equipment Like To Be Accessible To Children |
| IEC62368 Figure V.3: | Blunt Probe, Telecom Test Probe | IEC62368 Figure V.4: | Wedge Probe |
| IEC62368 Figure V.5: | Terminal Probe | Customize: | OEM ODM |
| High Light: | IEC 62368 234mm Terminal Probe , CNAS Terminal Probe , 234mm CSA wedge probe |
IEC62368 Figure V.1 V.2 V.3 V.4 V.5 Telecom Terminal Test Probes
| IEC62368 probe no. | Probe Name |
| IEC 62368 Figure V.1 | Jointed test probe for equipment likely to be accessible to children |
| IEC62368 Figure V.2 | Jointed test probe for equipment like to be accessible to children |
| IEC62368 Figure V.3 | Blunt probe, Telecom Test Probe |
| IEC62368 Figure V.4 | Wedge probe |
| IEC62368 Figure V.5 | Terminal probe |
I) IEC 62368 Figure V.1 Jointed test probe for equipment likely to be accessible to children
conforms to many standard requirement of
IEC 62368 Figure V.1
UL474 Fig 5.1
UL507 Fig 9.2(PA100A)
UL982 Fig 7.1
UL1017 Fig 2
UL1062 Fig1.2
UL1278Fig 8.3
UL1310 Fig 16.2
UL60065 Fig14
and UL60950 Fig NAF.1.
Palm simulator and restricted joint movement simulates human finger movement.
The UL accessibility probe is also called UL articulated probe or jointed test finger probe.
It is widely used in the enclosure protection test of the electrical equipment.
II)IEC 62368 Figure V.2 Jointed test probe for equipment like to be accessible to children
This is a precision test finger made in accordance with many standards like
IEC 62368 Figure V.2
IEC 61032 figure 2,
IEC60950 figure 2A,
IEC60884,
IEC60335,
UL507,
and UL1278 figure 8.4.
This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito, finger, base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.
Customizable: it can be used for anti-electric shock test when equipped with pluggable banana plugs and amphenol connector at the end of the handle , or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).
III)IEC62368-1 Figure V.3-Blunt probe, Telecom Test Probe
Required by IEC60950 fig 2C, IEC 62368 figure V. 3, EN, and some UL and CSA standards to test accessibility to TNV circuits (telecom). The handle and stop face are nylon, the tip is stainless steel.
For a plug, jack, or connector, the blunt probe of IEC62368-1 Figure V.3 is applied without appreciable force and in any possible position to the
plug, jack, or connector.
IV)IEC62368-1 Figure V.4 Wedge probe
IEC62368-1 Figure V.4 UL Test Bent Finger Probe PA100A Test Bent Finger Probe
1, According to : IEC62368-1 Figure V.4 UL507 (PA100A), UL1017 figure 2, figure 6.5 UL1062, UL982 figure 7.1 and figure 1.2 UL474 figure 5.1 and figure 14, UL60065 UL6500 figure 14, Figure 7.2 and figure 8.3 UL1278 UL1082
2, Mainly used for the inspection to prevent the body touch dangerous live parts,heating or hot parts, mechanical components, as well as inspection of solid foreign bodies into the equipment. It is necessary for protection against electric shock test of household and similar electrical appliances
3,This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.The handle is made of nylon. The finger is made of stainless steel.
| Test finger length | 234mm |
| Knurled length | 30/30/40mm |
| Material | stainless steel and nylon |
| Reference | IEC62368-1 Figure V.4 UL507,UL982,UL1278,UL1062,UL1310,UL474,UL60065 |
V)IEC62368-1 Figure V.5 Terminal probe
This probe conforms to the standard requirement of IEC62368-1 Figure V.5 IEC61032 figure 4 test probe D and IEC60529 for IP4 and IEC60065.
This rod probe is intended to verify the protection of persons against access to hazardous parts.
It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector.
Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .
The probe whose model number is with “T” is with force.